I’m wondering if someone know how to set up Mercedes Xentry/DAS to work with I-2013 Multidiag Access J2534 interface.
Here is what i get from fellows in different forums. Big thanks to all.
Questions: Dear all, Is this passthru j2534 works perfect with DAS XENTRY ?
Answers... Here you go...
No.only work Xentry
Don't waste your time!
Online programing is ok with passthru!
But diagnosis by DAS and Xentry is not good at all!
With new cars,works good on 2005-2007 and UP (mercedes and smart)Old cars can only connect to the Motor unit and in some models only
I confirm that it works with almost all modules on can-bus..I test just for fun once and I was impressed..diagnose & coding almost without any limits but I test only on w211,w219,w203 and all cars was 2004 to 2009. wink2 old actia is still one of my favorite tools in my boxes and can work with many software on diler level
....
Hopefully, it’s helpful to you all. And good luck.
0 Comments
Here is a quick fix to diagnose Renault Clio airbag warning light: use Launch X431 Creader VIII CRP129 to read Renault Clio DTC fault codes and find the problem cause!
Connect Launch CRP129 with Renault Clio. Turn car ignition on and power up CRP129.
Problem: Renault Clio airbag warning light is on.
To find the problem cause, you should first read DTC error code!
Use Launch X431 CRP129, choose “Diagnose” and “Scan”.
Select car brand “Renault”.
Select car model “Clio II PH2/3/4”.
Choose diagnose mode: “Manual select”.
Choose “Airbag”.
Choose “Read DTCs”.
Launch CRP129 read Renault Clio DTC codes and will help you find out the cause of airbag warning light!
DTC DF060
DTC DF065
DTC DF183
Itâs easy to read Peugeot 206 pin code via EEPROM using XTOOL X100 PAD tablet key programmer! This blog will show you how XTOOL X-100 PAD read 2007 Peugeot 206 as an example.
Step1. Connect XTOOL X-100 PAD with car ECU circuit via EEPROM and pogo pin touch holder.
Step2. Power up XTOOL X100 PAD, go to âSpecial Functionâ and choose âEEPROM Adapterâ
Step3. Then choose âRead Pin Codeâ.
Select âPeugeotâââ206â â âBSI95160â â âV2â.
And XTOOL X100 PAD easily read out the pin code âWU23â for 2007 Peugeot 206! Itâs correct pin code as expected!
Check below link to get more details about XTOOL X100 PAD â¬475 !
It is from Xtool technical support:How to read Peugeot 206 pin code via EEPROM by XTOOL X100 PAD?
Here is the nissan consult 3 plus v61.10 nissan diagnostic tool software, verified ok by obd2express engineers. Come to the first clone version of Nissan Consult iii plus v61.10 to do ECU programming.
Free download Consult iii plus v61.10:
*** Highlights of Consult 3 plus v61.10***
can be used on Windows 7 or XP systems
support ECU Programming (First clone version for it; earlier versions only for diagnosis)
can read security codes and program new keys with specialized security card for Consult 3+
work for all Nissan, Infiniti and Nissan GTR cars to the 2016 year
Feedback on programming with Nissan Consult III plus:
- managed to program TCM and DCM
- sounds great on my an Armada and Titan that have CEL issues which the Consult already paid for itself by helping fix them
- tested successfully it can calculate pin code for key programming, it can also make key but need to get one additional Nissan Consult-3 Plus Security Card, otherwise the button “Immobilizer key” is gray color and is unavailable, Nissan Consult-3 Plus Security Card is expensive to me, so I didn’t order one, but borrow one from my friends and use together with consult3 plus.
It is all about Carprog v9.31 Interface China Clone Internet connection issues. Wish this helps.
Success and fail:
CARPROG success on vw diag, Peugeot temic, Bosch
CARPROG fail on Opel direct, Nissan direct, vw direct
Symptom when fail to...
The carprog only can read and verify Opel, Nissan and vw. When click âFIND CRASHâ, it stopped and popped up the error message, saying âCanât connect to internet serverâ
Users analysis from forums:
So Basically they are moving all algorithms to online database, currently, they are kept and updated locally and it makes problems when same module is in both Carprog and Universal Crash Cleaner online, When they fix algorithm or add new module in Carprog, it is not in Universal Cleaner. So instead entire data is going to be moved to database online and Carprog will have none locally, at same time they will have easier time updating them and also making them available not only on Carprog.. if any one of you guys cant connect to the server then you would have to email them for support..right now they are still open to suggestions from what I've been told..
DIYOBD2 technicians opinion:
Chinese Carprog cannot support the functions when the system says â... connect to internet...â. A more powerful auto diagnostic tool is advised at http://www.obd2france.com/
This is from OBD2 Francais website technical support:Carprog 9.31 canât connect to internet server (solved)
The local Autel shop is peddling the autel maxidas® ds708 automotive diagnostic & analysis system. It seems to be a fairly inclusive scan tool at a price that is attractive enough that I am strongly considering purchasing one for personal use...
From what I can tell, they are relatively new to the US market and nobody around here has heard of them, so before I buy one (yes I'll demo it too) I'd like some input from those who have seen one in the wild...
The problem is that I want OBD 1 coverage AND ABS/airbag, something that the average sub 400.00 scan tool wont do... Some one says DS708 is disappointing in the coverage of older vehicles - it works on none of old Japanese plugs - Toyota, Mazda, Nissan, the only OBDI it works on is Honda, it's useless on the rest. But does Mercedes and BMW.
Some days later, I had the MaxiDas unit on demo from the diyobd2. I can say that I'll likely opt not to buy it. One of the big reasons for me buying a tool of this caliber is to be able to use it on the wife's OBD I car and access her ABS and airbag info. This unit will not communicate with OBD I in site of the fact that it comes with the GM 12 pin connector. Also noticed some (simple) spelling errors (like engein instead of engine). Not sure why that bugs me but it does. I plugged it into an 03 Olds Alero and was pleasantly surprised at it's level of accessibility. I could reprogram key fobs, reset trans adaptives, do CKP variation relearns and command several relays and widgets for testing purposes. Also had access to all live data in the BCM, SRS and ABS.
The Snap-On rep stopped by this week and made a smoking deal on a China site. It's supposed to be faster than previous offerings and still be quite capable.
I got the Autel DS708 China Clone unit this Monday. I have to say how lucky i am can get it with the best price (€699). It’s said that DS708 has been stopped production and now at sales in China. I am sure it is original one as before for i have taken it to the local shop to verify. So now, if anyone has specific questions concerning it, feel free to ask.
Ceci est Autel Original Diagnostic du support technique du site Web www.obd2france.com:Revue sur Autel DS708 MaxiDAS pour OBD I vieilles voitures
It’s newly tested working that you can program 2007 Citroen C4 remote key by using SuperOBD SKP900 Key Programmer! Below part will show you how-to guide and steps.
A 2007 Citroen C4 with a working remote key wants to add another new remote.
Step1. Connect SKP-900 key programmer with Citroen C4 via car OBD diagnostic port. Choose “Immobilizer” then “Citroen”.
Choose “Immobilizer 2” and “Immobilizer System”.
Step2. Insert the new remote key to turn on car ignition. Press YES button to continue.
Choose “Adapt Key” function.
Follow the instruction to close all car doors and car trunk. Press YES button to continue.
Step3. Enter the pin code. (You can calculate this Citroen pin code CCW3 using OBDSTAR F108 PSA Pin Code Tool)
Press YES button to confirm.
Turn ignition off then turn it on again.
Wait a while and it will show you the tip “Adapt Complete”. Press the NO button to go back. Remove the new key.
Step4. Use the new key to turn ignition on then press the key LOCK button for 3 seconds. All steps complete!
In this way SKP-900 key programmer successfully program a new remote key for Citroen C4 2007!
Renault CAN CLIP v160 v162 v163 v164 Free download (100% working)
Renault can clip download & try on your own risk:
Renault can clip v164.iso - Safe to use, crack, no pass--- 100% working!!!!!!
obd2france.com engineers have tested working Renault can clip software:
Now they offers tested Renault can clip V164 (NEWEST) for less than €10
Working Windows:
Renault CLIP v164 is tested on Windows XP.
For Windows 32, it needs luck.
Hardware to use with:
(Populous) Renault can clip diagnostic tool --> worked!
(Best quality) Renault can clip diagnostic interface --> work fine!
(Normal) Renault can clip diagnostics --> work without issues!
Note: only the three versions above are tested OK with CLIUP V164. To work with others, try at your own risk!
Renault CAN CLIP V164 Tested YES:
Renault can clip diagnostic tool ORIGINAL vs. CLONE:
Can Clip VS Multidiag Pro VS DDT2000:
Renault CAN CLIP Windows 7 32bit:
Possible CAN CLIP interfaces can be used with CLIP V164:
Renault CAN CLIP reviews:
It is from Renault can clip technical support:Free download Renault CAN CLIP v160 v162 v163 v164 (100% working)
|
obd2diy.fr:
obd2diy.fr s'applique spécialement à fournir d'appareil diagnostic auto - OBD2 Français Valise Diagnostique. Nous offrons des produits de haute qualité, le meilleur service et le prix le plus compétitif 存档
October 2019
类别 |